Brick Wall Calculator
Calculate bricks, mortar bags, and wall tie ties needed for single or double wythe masonry walls.
Enter Your Dimensions
US • ftHow We Calculated This
• Store bricks covered on pallets off the bare ground to prevent efflorescence absorption.
Formula & Volumetric Method
Single wythe standard modular brick wall requires approx 6.85 bricks per square foot with standard 3/8" mortar joints.
Calculations are performed strictly using standard civil engineering constants. Volumetric outputs are normalized to true compaction rates, ensuring purchased quantities match jobsite yields.
Jobsite Engineering Guidelines
- Order 5% to 10% extra bricks for cuts, half-bats at corners, and transit breakage.
- Install masonry wall ties every 16 inches vertically and 24 inches horizontally into framing.
Frequently Asked Questions
How accurate is the Brick Wall Calculator for ordering materials?
Our calculations match standard store packaging sizes in the US, Canada, UK, and Australia. We include a safety waste buffer (default 8% to 12%) so you do not run short due to uneven ground or spillage.
Why should I add extra for waste when ordering?
Uneven ground, cutting scrap, and leftover mix in the wheelbarrow or mixer drum consume an extra 5% to 15% of material. Ordering only the exact measurement usually leaves you short, which can lead to expensive extra delivery fees.
Does this calculator support both Imperial and Metric units?
Yes. You can switch between US Customary (feet, inches, cubic yards, pounds), Canadian units, UK metric, and Australian standards using the region selector in the header or the unit dropdown on each input.